🔧 Power Meets Precision—Elevate Your Projects Today!
The Mxfans Synchronous Motor is a compact, efficient motor designed for various applications, including fans, crafts, and display stands. With a power consumption of just 4W and a stable speed of 18 RPM, it operates quietly and reliably, making it an ideal choice for both DIY enthusiasts and professional projects.
| Manufacturer | blhlltd |
| Part number | BLMN201806042754 |
| Item Weight | 80 g |
| Product Dimensions | 6.5 x 4 x 4.9 cm; 80 g |
| Item model number | BLMN201806042754 |
| Material | Metal |
| Voltage | 220 Volts |
| Horsepower | 4 Watts |
| Speed | 18 RPM |
| Batteries included? | No |
| Batteries Required? | No |
S**.
no noise
Purchased a 5'long electric fire for a media wall about 2 weeks ago. After 2 days a loud ticking noise started. I contacted the firm( Manchester warehouse but made in Hong Kong). They wanted me to wrap it up and send it back. I thought what a hassle. They then offered me a 10% refund- £33. I stripped it down, sent for this motor,fitted it ( a bit fiddly but 30mins tops) now have no noise and very pleased and £22 change in my pocket. Does the job well and have ordered another for a spare as I know these motors will dry out.
T**F
Nice quiet gearbox.
Works very well nice quiet gearbox.
K**N
easy to fit
does what it says
D**M
Good replacement for Dimplex Dakota optiflame motor, needs modifications though
My dimplex dakota fire lost the flame effect and worked out the optiflame motor had gone. Looked for a direct replacement and failed.Found a helpful review on this which indicated this may work. Took a punt and here's what I found.TURN OFF AT MAINS FIRST.THe existing motor had three wires, black brown and white and the new motor only two black wires.Removed the old motor (yes there's not much slack on the wires) and connected the black and brown wires to the two wires on the new motor. Put some heatshrink on the now redundundate white wires and turned on at the mains, bingo, worked first time.Unfortunately the screw holes don't align so had to drill new holes, 10 minutes later it was all mounted.Tidied the cabling up and put everything back together.10 minutes later it was off again. I think the metal drive shaft is a little shorter and slightly less diameter than the previous one and it had become disconnected. Fixed with a small jubillee clip, working fine now.One think you must understand is the is a CW/CCW motor, is works clockwise (CW) and counterclockwise (CCW) which is toggled by turning it on and off. No big deal to me but if you notice the flame is going the wrong way turn it off and on again and its sorted.Bit of a pain but a £10 fix vs a £170 new fire is a no brainer to me.Just ordered a spare in case this breaks, at least the screw holes will line up.
M**A
Good product
Easy to fit,working well!
S**E
Don't work as they should
Brought two of these to replace a faulty one in my fan( I am an electronics engineer) and the cogs slip inside the motor so I still have a faulty fan. They are not strong enough even though they are a exact replacement.
C**S
Fit perfectly
Was exactly as hoped. Exact replacement
R**N
Damaged on receipt
Unfortunately the casing of one of the wires was damaged on receipt about half way down and has left exposed wire.
Trustpilot
5 days ago
2 weeks ago
